G652D FTTH Drop Fiber Optic Cable Singlemode For Messenger Telecommunication Cable
G652D FTTH Drop Fiber Optic Cable With Messenger Telecommunication Cable
FTTH G652D 1 2 4 core with Messenger Telecommunication Cable Fiber Drop Cable Indoor
Butterfly Flat Indoor Drop Cable is widely used in fiber to the home (FTTH) network system, which can directly connect the communication line from the LAN to the end users. Butterfly flat drop cable uses special low-bend-sensitivity fiber to provide high bandwidth and excellent communication transmission, it's very suitable for indoor cabling, end users directly cabling, and access network.
With simple installation, FTTH indoor cables can be directly connected to the homes. They are suitable for connecting communication equipments, and used as access building cables in premised distribution system.
Note: The bending radius is only applicable to the ordinary Bow-Type drop cable without suspension wire part.
1000m/roll and 2000m/roll; Other length available on request.
| Category |
Description |
Specifications |
| G.657A1 Optical Specifications |
Attenuation @1310-1625nm |
≤0.36dB/km |
| Attenuation @1383±3nm |
≤0.36dB/km |
| Attenuation @1550nm |
≤0.22dB/km |
| Attenuation discontinuity |
≤0.05 dB |
| Attenuation vs. Wavelength @1285~1330nm |
≤0.05 dB/km |
| Attenuation vs. Wavelength @1525~1575nm |
≤0.05 dB/km |
| Zero Dispersion Wavelength |
1300~1324nm |
| Zero Dispersion Slope |
≤0.092ps/(nm².km) |
|
Dispersion @1310nm |
≤3.5 ps/nm.km |
| Dispersion @1550nm |
≤18 ps/nm.km |
|
Polarization Mode Dispersion (PMD) |
≤0.2ps/km¹/² |
|
Cable Cutoff Wavelength (λcc) |
≤1260nm |
|
Effective Group Index of Refraction @1310nm |
1.4675 |
| Effective Group Index of Refraction @1550nm |
1.4681 |
|
Macro bend loss (30mm radius, 100 turns) 1625nm |
≤0.1 dB |
| Geometric Specifications |
Mode Field Diameter @1310nm |
9.2±0.6μm |
| Mode Field Diameter @1550nm |
10.4±0.8μm |
| Cladding Diameter |
125±1μm |
| Cladding Non-Circularity |
≤1.0% |
| Coating Diameter |
245±7μm |
| Coating/Cladding Concentricity Error |
≤8μm |
|
Core/Cladding Concentricity Error |
≤0.8μm |
| Mechanical Specifications |
Proof Test level |
≥1.0% |
| Fiber Curl Radius |
≥4.0m |
| Peak Coating Strip Force |
1.3~8.9N |
